|
4#
楼主 |
发表于 2010-5-26 12:05:23
|
只看该作者
BB HW board designer / specialistBB
Requirements:
MSc (BSc) University degree in Electrical Engineering or similar experience
3-5 years working experience in baseband board design area
Technology knowledge about processor architectures, memories (DDR2,..), high speed bus systems (PCI, PCI-E, sRIO, GbE), clock generation and distribution
Experience with design- and simulation tools (e.g. Mentor Boardstation, Design Architect)
Experience in applying logic analyzers, high speed oscilloscopes, spectrum analyzers and microprocessor debugger
Manual capability in handling of electronic boards (modifications in the LAB) and preparation of LAB – implementations
Fluent written and spoken English
Good understanding of HW development process
Good communication and problem solving skills
You are a team player
BB HW integration test engineerBB
Requirements:
MSc (BSc) University degree in Electrical Engineering or Physics
Several years experience in digital HW, HW related SW (RF HW is an advantage).
Knowledge in 3GPP standards and in integration of digital HW, RF-HW and SW.
Knowledge of actual interfaces in the communication technology (CPRI, OBSAI and/or ITU -T standard interfaces).
Knowledge of instrument driver (e.g. AHTI, SCPI, LabView, HPVEE) and script/programming languages like C, Perl, Tcl/Tk.
Experience in applying of logic analyzers, high speed oscilloscopes, spectrum analyzers and microprocessor debugger.
Manual capability in handling of electronic boards (modifications in the LAB) and preparation of LAB – implementations
Fluent written and spoken English
Good understanding of HW development process
Good communication and problem solving skills
You are a team player
Engineer Specialist, RF
REQUIREMENTS:
B.Sc or M.Sc, 3 - 5 years of practical experience in BTS RF Design (receiver, transmitter, filters), good analog electronic understanding, good RF schematic & lay out design skills, strong RF circuit simulation experience, soldering experience and good understanding of digital electronics.
Design engineer, RF
REQUIREMENTS: B.Sc or M.Sc, 1 - 5 years of practical experience in RF Design (receiver, transmitter, filters), good analog electronic understanding, good RF schematic & lay out design skills, strong RF circuit simulation experience, soldering experience and basic understanding of digital electronics. Ability to use state of the art RF measurement equipment is must and experience of using test automation SW tools is a big benefit.
HW Reliability testing engineer
REQUIREMENTS:
B.Sc or M.Sc, Microwave electronic engineering , telecommunications is preferred
More than 3 years of practical experience in RF technology area
Technical competence and understanding of GSM/EDGE, WCDMA, LTE and TD LTE requirements in 3GPP standards 45.005, 25.104, 36.104 and 37.104
Understanding of R&D processes
Be familiar with Base Station HW & SW architecture
Common understanding of electronics, PWB design etc.
Knowledge from some of the following tools/interfaces: C, C++, CVI, Teststand, Labview, ActiveX and measurement devices
PERSONAL ATTRIBUTES:
We are looking for openly communicating persons with
Passion to learn new technologies and willing to accept challenges,
Good listener,
Results and quality oriented,
Capability of analytical thinking and argumentation,
Capable to structure complex tasks, problem solving skills,
Self driven, take responsibilities, flexible, co-operative, motivated, open minded and communicative,
Capable of decision making and driving own work effectively, hard working and committed,
Fluent written and spoken English,
Project Manager/Team Leader
REQUIREMENTS:
B.Sc or M.Sc, Microwave electronic engineering , telecommunications is preferred.
More than 5 years of practical experience in R&D testing or hardware integration area project management,
Technical competence and understanding of GSM/EDGE, WCDMA, LTE and TD LTE requirements in 3GPP standards 45.005, 25.104, 36.104 and 37.104.
Understanding of R&D processes
Be familiar with Base Station HW & SW architecture
Common understanding of electronics, PWB design etc.
Strong networking skills
RF Test Specialist RF
REQUIREMENTS:
B.Sc or M.Sc, Microwave electronic engineering , telecommunications is preferred
More than 3 years of practical experience in RF technology area
Technical competence and understanding of GSM/EDGE, WCDMA, LTE and TD LTE requirements in 3GPP standards 45.005, 25.104, 36.104 and 37.104
Understanding of R&D processes
Be familiar with Base Station HW & SW architecture
Common understanding of electronics, PWB design etc.
Knowledge from some of the following tools/interfaces: C, C++, CVI, Teststand, Labview, ActiveX and measurement devices
SW Engineer, Test automation
REQUIREMENTS:
Master's or Bachelor's degree in Engineering, Telecommunications, Computer Science or Software Technology or an equivalent education.
Software coding skills.
Technical competence and understanding of 3G and LTE L1, L3 layers and SW components.
Technical competence and understanding of GSM/EDGE, WCDMA, LTE and TD LTE requirements in 3GPP standards 45.005, 25.104, 36.104 and 37.104.
Knowledge of basic transport technologies, layers and protocol stacks: Ethernet, MPLS, Pseudowire, E1, STM1, ATM, IMA, IP, UDP, TCP, ICMP, ToP, HTTP, HTTPS, IP sec, FTP, Secure FTP, SOAP, AISG
Reliability specialist
Requirements:
M.Sc. or B.Sc. studies in electronics engineering or equivalent
3-5 years experience of HW design work and project flow for telecommunication business. Good knowlegde of PWB , BB and RF design.
Good knowledge of Reliability Engineering principles, tools and methods used in the telecom industry.
Knowledge of electronics components and materials, basics of failure analysis.
Fluent spoken and written English
R&D Engineer(Multipurpose Platform for 2G, 3G and LTE Applications (DX200)
Job description:
Engineer is responsible for designing, implementing and testing/verifying platform functionalities. The work aims to ensure that new functionality are developed, built and verified without breaking any existing core system functionality. It also aims to maintain existing functionalities in the platform.
Job Requirements:
- Master's or Bachelor's degree in Engineering, Telecommunications, Computer Science or Software Technology or an equivalent education or skills.
- Passionate in Programming and/or testing.
- Good in C programming.
- Experience in embedded SW developing or Linux SW developing is a plus.
- Good knowledge about SW development methods both waterfall process and agile methods.
- You like work in a multicultural team.
- You are also able to work independently and you take initiative.
- You like to learn new things and you able to adapt to new situations.
- You are not afraid of having multiple ongoing works.
- Fluent spoken and written English is a must!
我们的联系方式:
电子邮件:chai@ltconsultant.cn
MSN:chinachai2009@live.cn(白天都在线)
谢谢:)
建议尽量直接发送您的简历至邮件给我们即可! |
|