Deployment Testcase
Test Case ID：62
Title：        UserExitForm
Path：        \Deployment\General
Author： xxxxx
Purpose : make sure the dialog to test is properly designed, look for truncations, wrong tab orders, duplicated hotkeys, overlappings and any other posible issues
Steps：
Pre-steps:
1. Launch App.
2. Go to “Tools” / “Import/Export Settings…”
3. Select “General development settings”
4. Click Reset Settings
5. If you are prompted to save your settings, click “Don’t save”
6. A dialog appears telling you that the operation had been successful

Purpose:
Verify the app can be canceled during installation
Test Steps:
1. Launch [App Name]
2. From the drop down menu select "File", "New" and "Project"
3. The New project Dialog box should appear
4. In “Project Types”, select “Other Project Types” and under this, “Setup and deployment”. From the “Templates” select a setup project, give the project a name for example "Deploy1" and press “OK”
5. From the “Build” menu click “Build Solution” and wait until the project has been built
6. Close the project and navigate to the folder where you saved your project
7. Double click the Setup folder and then double click the Debug folder
8. Click the Setup.exe to launch the Windows Installer
9. At the first stage of the wizard click the “Cancel” button and click “Yes” when asked are you sure you want to exit
10. The "Installation Interrupted" dialog appears

3q