TA的每日心情 | 擦汗 昨天 09:02 |
---|
签到天数: 1042 天 连续签到: 4 天 [LV.10]测试总司令
|
方法:swipe(self, start_x, start_y, end_x, end_y, duration=None)
参数:start_x, start_y : 表示开始滑动时的初始坐标,即从6哪里开始滑动;
end_x, end_y : 表示滑动后的坐标,即滑动到哪里;
duration : 表示滑动过程的时间间隔,单位以毫秒计算。模拟操作时,我们最好设置这个时间间隔,避免由 于代码运行太快,但是真机或者模拟器反应比较慢,导致操作失败。
坐标说明:屏幕左上角为起点,坐标为(0,0),起点往右为X轴,起点以下为Y轴。
思路:如果我们要模拟左滑的操作,初始点坐标就在右边(大概屏幕宽的3/4,高的1/2),然后向左滑动,在左边结束,结束点坐标大概是屏幕宽1/4,高1/2。
实现:
1、获取手机屏幕的宽和高(为了兼容不同手机的分辨率):
- def get_phone_size(driver):
- """获取手机屏幕的大小"""
- width = driver.get_window_size()['width']
- # 获取手机屏幕的宽
- height = driver.get_window_size()['height']
- # 获取手机屏幕的高
- return width, height
复制代码
2、左滑代码:
- def swipe_left(driver, duration=300):
- """左滑操作"""
- width, height = get_phone_size(driver)
- start_x, start_y = 3/4 * width, 1/2 * height
- end_x, end_y = 1/4 * width ,1/2 * height
- driver.swipe(start_x, start_y,end_x, end_y, duration)
复制代码 3、同理,可得右滑、上滑和下滑代码:
- def swipe_right(driver, duration=300):
- """右滑操作"""
- width, height = get_phone_size(driver)
- start_x, start_y = 1/4 * width, 1/2 * height
- end_x , end_y = 3/4 * width, 1/2 * height
- driver.swipe(start_x,start_y,end_x, end_y, duration)
- def swipe_up(driver, duration=300):
- """上滑操作"""
- width, height = get_phone_size(driver)
- start_x , start_y = 1/2 * width ,3/4 * height
- end_x , end_y = 1/2 * width , 1/4 * height print(end_y)
- driver.swipe(start_x, start_y, end_x, end_y, duration)
- def swipe_down(driver, duration=300):
- """下滑操作"""
- width, height = get_phone_size(driver)
- start_x, start_y = 1/2 * width, 1/4 * height
- end_x , end_y = 1/2 * width, 3/4 * height
- driver.swipe(start_x, start_y,end_x, end_y ,duration)
复制代码 4、根据实际方向滑动,调用运行上述代码即可,例如我们需要上滑:
- time.sleep(1)#如果不等待,swipe操作不顺畅
- swipe_up(driver)#上滑操作
复制代码
作者:静静地就好
链接:https://www.jianshu.com/p/db0e1a15cb93
来源:简书
|
|