用LR录制C/S程序后的脚本

冰清

用LR录制C/S程序后的脚本见下，这些脚本要怎么看呢？知道的朋友请指点下。
Action()
{
    lrs_send("socket0", "buf148", LrsLastArg);
    lrs_receive("socket0", "buf149", LrsLastArg);
    lrs_send("socket0", "buf150", LrsLastArg);
    lrs_receive("socket0", "buf151", LrsLastArg);
    lrs_send("socket0", "buf152", LrsLastArg);
    lrs_receive("socket0", "buf153", LrsLastArg);
    lrs_send("socket0", "buf154", LrsLastArg);
    lrs_receive("socket0", "buf155", LrsLastArg);
    lrs_send("socket0", "buf156", LrsLastArg);
    lrs_receive("socket0", "buf157", LrsLastArg);
    lrs_send("socket0", "buf158", LrsLastArg);
    lrs_receive("socket0", "buf159", LrsLastArg);
    lrs_send("socket0", "buf160", LrsLastArg);
    lrs_receive("socket0", "buf161", LrsLastArg);
    lrs_send("socket0", "buf162", LrsLastArg);
    lrs_receive("socket0", "buf163", LrsLastArg);
    lrs_send("socket0", "buf164", LrsLastArg);
    lrs_receive("socket0", "buf165", LrsLastArg);
    lrs_send("socket0", "buf166", LrsLastArg);
    lrs_receive("socket0", "buf167", LrsLastArg);
    lrs_send("socket0", "buf168", LrsLastArg);
    lrs_receive("socket0", "buf169", LrsLastArg);
    lrs_send("socket0", "buf170", LrsLastArg);
    lrs_receive("socket0", "buf171", LrsLastArg);
    lrs_send("socket0", "buf172", LrsLastArg);
    lrs_receive("socket0", "buf173", LrsLastArg);
    lrs_send("socket0", "buf174", LrsLastArg);
    lrs_receive("socket0", "buf175", LrsLastArg);
    lrs_send("socket0", "buf176", LrsLastArg);
    lrs_receive("socket0", "buf177", LrsLastArg);
    lrs_send("socket0", "buf178", LrsLastArg);
    lrs_receive("socket0", "buf179", LrsLastArg);
    lrs_send("socket0", "buf180", LrsLastArg);
    lrs_receive("socket0", "buf181", LrsLastArg);
    lrs_send("socket0", "buf182", LrsLastArg);
    lrs_receive("socket0", "buf183", LrsLastArg);
    lrs_send("socket0", "buf184", LrsLastArg);
    lrs_receive("socket0", "buf185", LrsLastArg);
    lrs_send("socket0", "buf186", LrsLastArg);
    lrs_receive("socket0", "buf187", LrsLastArg);
    lrs_send("socket0", "buf188", LrsLastArg);
    lrs_receive("socket0", "buf189", LrsLastArg);
    lrs_send("socket0", "buf190", LrsLastArg);
    lrs_receive("socket0", "buf191", LrsLastArg);
    lrs_send("socket0", "buf192", LrsLastArg);
    lrs_receive("socket0", "buf193", LrsLastArg);
    lrs_send("socket0", "buf194", LrsLastArg);
    lrs_receive("socket0", "buf195", LrsLastArg);

jenney

我也遇到过同样的问题，答案寻找中！~~~~

higkoo

lrs_receive("socket0", "buf169", LrsLastArg);
接收/发送某字符串到指定端口

higkoo

The lrs_receive function reads the incoming data from a datagram or stream socket. If no incoming data is available at the socket, lrs_receive waits for data to arrive unless the socket is non-blocking.

VuGen determines the expected size of the buffer from the recorded session. If the buffer size does not match (smaller or larger), lrs_receive rereads the incoming data carried by the socket, until the receive_timeout. By default the receive_timeout is 10 seconds. You can modify the timeout using lrs_set_recv_timeout or lrs_set_recv_timeout2.

Note that the successful completion of a lrs_receive does not indicate that all of the data was successfully received. If the received buffer does not match the expected buffer, VuGen sends a message to the output indicating the mismatch and continues with script execution.

If the socket's type is TCP and the remote side has shut down the connection in an orderly way, lrs_receive finishes without returning any data. If the connection was aborted, lrs_receive returns one of the Windows Sockets error codes.

This function is recorded during a Windows Socket session

qitengfeng

怎么不去看data.ws里面的内容，内容都在里面

冰清

那里面的脚本和ACTION里面的脚本有什么区别啊？