高手门请帮忙。LR8.1为什么不能录制Action

jinsky

没有找到你说的文件,下面是Recording log
---------------------------------------------------------------------
[Network Analyzer ( fcc: 534)] Load Network Traffic Analyzers:
[Network Analyzer ( fcc: 534)]     Analyzer Module: WPLUS (value=)
[Network Analyzer ( fcc: 534)]     Analyzer Module: WebBase (value=GetHttpProtocolAnalyzer:api_http_filter.dll)
[Network Analyzer ( fcc: 534)]     + Network Analyzer: api_http_filter.dll @ GetHttpProtocolAnalyzer Loaded!
[Network Analyzer ( fcc: 534)]     + Interception Auditors: WinInetWplusInterceptionAudit:api_http_filter.dll
[Network Analyzer ( fcc: 534)]     Analyzer Module: QTWeb (value=)
[Network Analyzer ( fcc: 534)]     Analyzer Module: local_server (value=)
[Network Analyzer ( fcc: 534)] ------------------------------------------------------------------------------------------
[Network Analyzer ( fcc: da0)] Address lookup for TMS-jinjianguo-T1 = 192.168.20.107
[Network Analyzer ( fcc: d88)] Address lookup for TMS-jinjianguo-T1 = 192.168.20.107
[Net An. Warning  ( fcc: d88)] Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #1. Unable to connect to remote server: rc = -1 , le = 0)
[Net An. Warning  ( fcc: d88)] Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #2. Unable to connect to remote server: rc = -1 , le = 0)
[Net An. Warning  ( fcc: d88)] Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #3. Unable to connect to remote server: rc = -1 , le = 0)
[Net An. Error    ( fcc: d88)] Request Connection: Remote Server @ 127.0.0.1:1080   (Service=)  NOT PROXIED! (REASON: Unable to connect to remote server: rc = -1 , le = 0)
[Network Analyzer ( fcc: 1fc)] Address lookup for TMS-jinjianguo-T1 = 192.168.20.107
[Net An. Warning  ( fcc: 1fc)] Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #1. Unable to connect to remote server: rc = -1 , le = 0)
[Net An. Warning  ( fcc: 1fc)] Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #2. Unable to connect to remote server: rc = -1 , le = 0)
[Net An. Warning  ( fcc: 1fc)] Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #3. Unable to connect to remote server: rc = -1 , le = 0)
[Net An. Error    ( fcc: 1fc)] Request Connection: Remote Server @ 127.0.0.1:1080   (Service=)  NOT PROXIED! (REASON: Unable to connect to remote server: rc = -1 , le = 0)
[Network Analyzer ( fcc: 1fc)] Address lookup for TMS-jinjianguo-T1 = 192.168.20.107
[Net An. Warning  ( fcc: 1fc)] Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #1. Unable to connect to remote server: rc = -1 , le = 0)
[Net An. Warning  ( fcc: 1fc)] Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #2. Unable to connect to remote server: rc = -1 , le = 0)
[Net An. Warning  ( fcc: 1fc)] Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #3. Unable to connect to remote server: rc = -1 , le = 0)
[Net An. Error    ( fcc: 1fc)] Request Connection: Remote Server @ 127.0.0.1:1080   (Service=)  NOT PROXIED! (REASON: Unable to connect to remote server: rc = -1 , le = 0)

shanxi

记录上写的很明白了，只看这条：

[Net An. Warning  ( fcc: d88)] Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #1. Unable to connect to remote server: rc = -1 , le = 0)
下面的Log是Vugen.exe在不停尝试去连接，但始终没能成功

[ 本帖最后由 shanxi 于 2007-5-12 12:54 编辑 ]

jinsky

谢谢啊。.问题出在这里。.怎么去解决啊.!!麻烦你指点一下 .~!!

shanxi

用netstat命令看本地Server的1080端口服务启动了没？

再确保本地的1080端口是打开的，比如到系统防火墙里面把1080加入允许端口

jinsky

我机器上的是关闭的。.
我run->netsart
Active Connections
没有看到1080 .

jinsky

我机器上的防火墙是关闭的。.
我run->netsart
Active Connections
没有看到1080 .

shanxi

看这个链接上的KB:The Web Recorder is not recording any events


一个条件一个条件地去排除

先尝试一下 录制前卸载机器上的杀毒软件

jinsky

谢谢。啊。.!
我机器是是装了杀毒软件，2个。诺顿,和AVG.

jinsky

谢谢你的孜孜不倦的指点啊。我卸了 杀毒的软件在试 试!!

jinsky

我卸了 杀毒的软件,还是有这个错误!
[Net An. Error    ( fcc: 1fc)] Request Connection: Remote Server @ 127.0.0.1:1080   (Service=)  NOT PROXIED! (REASON: Unable to connect to remote server: rc = -1 , le = 0)

hello_kitty

我也有同样的问题,录制的时候有事件,但是脚本是空的,不知道怎么回事,因为公司不能上网,所以我的机子也没装防火墙和杀毒软件

shanxi

按照这个链接上的KB:The Web Recorder is not recording any events


已经排除了杀毒软件，防火墙设置这条了

用LR去做需要保证机器是干净的，所谓干净的机器是OS上没有安装除LR之外的其他软件。一般这样就不会出现录制问题

[ 本帖最后由 shanxi 于 2007-5-12 12:55 编辑 ]

jinsky

我还是重新装了个干净的系统,ok了。哈哈。谢谢你门,shanxi ,wwwlisheng ,rickyzhu and zee.

konglingzhen

不是吧，用loadrunner那么不容易啊，什么软件都不能装，我岂不是用不成loadrunner了？？

netcat

ddsdlkfj2

liulangchina

dsf

yxd2006

录制内部网试下

morriam

呵呵，当然，不仅是loadrunner，做测试一般来说都应该用一个相对干净的系统吧，避免引起不必要的冲突

impulse

51高手还真多

konglingzhen

我的8.1第一次装，没有关闭防火墙， 导致analysis module不能用，后来冲撞系统，关了防火墙、杀毒软件、断网装的，现在可以用了，呵呵，其实在这个过程中重装了一次系统，恢复了3、4次系统，sdlkfj1
怕怕哦。。

建议！装loadrunner之前一定要备份系统，嘎嘎。。。