录制C/S结构应用程序，如何将其参数化？

TEST_140

我录制的VC＋＋程序的操作过程，脚本视图如下：
Action()
{

        lr_start_transaction("denglu");

        lrs_create_socket("socket0", "TCP", "LocalHost=0", "RemoteHost=PINGPING:8489", LrsLastArg);

        lrs_send("socket0", "buf0", LrsLastArg);

        lrs_receive("socket0", "buf1", LrsLastArg);

        lrs_send("socket0", "buf2", LrsLastArg);

        lrs_receive("socket0", "buf3", LrsLastArg);

        lrs_send("socket0", "buf4", LrsLastArg);

        lrs_receive("socket0", "buf5", LrsLastArg);

        lrs_send("socket0", "buf6", LrsLastArg);

        lrs_receive("socket0", "buf7", LrsLastArg);

        lrs_send("socket0", "buf8", LrsLastArg);

        lrs_receive("socket0", "buf9", LrsLastArg);

        lrs_send("socket0", "buf10", LrsLastArg);

        lrs_receive("socket0", "buf11", LrsLastArg);

        lrs_send("socket0", "buf12", LrsLastArg);

        lrs_receive("socket0", "buf13", LrsLastArg);

        lrs_send("socket0", "buf14", LrsLastArg);

        lrs_receive("socket0", "buf15", LrsLastArg);

        lrs_send("socket0", "buf16", LrsLastArg);

        lrs_receive("socket0", "buf17", LrsLastArg);

        lrs_send("socket0", "buf18", LrsLastArg);

        lrs_receive("socket0", "buf19", LrsLastArg);

        lrs_send("socket0", "buf20", LrsLastArg);

        lrs_receive("socket0", "buf21", LrsLastArg);

        lrs_send("socket0", "buf22", LrsLastArg);

        lrs_receive("socket0", "buf23", LrsLastArg);

        lrs_send("socket0", "buf24", LrsLastArg);

        lrs_receive("socket0", "buf25", LrsLastArg);

        lrs_send("socket0", "buf26", LrsLastArg);

        lrs_receive("socket0", "buf27", LrsLastArg);

        lrs_send("socket0", "buf28", LrsLastArg);

        lrs_receive("socket0", "buf29", LrsLastArg);

        lrs_send("socket0", "buf30", LrsLastArg);

        lrs_receive("socket0", "buf31", LrsLastArg);

        lrs_send("socket0", "buf32", LrsLastArg);

        lrs_receive("socket0", "buf33", LrsLastArg);

        lrs_send("socket0", "buf34", LrsLastArg);

        lrs_receive("socket0", "buf35", LrsLastArg);

        lrs_send("socket0", "buf36", LrsLastArg);

        lrs_receive("socket0", "buf37", LrsLastArg);

        lrs_send("socket0", "buf38", LrsLastArg);

        lrs_receive("socket0", "buf39", LrsLastArg);

        lrs_send("socket0", "buf40", LrsLastArg);

        lrs_receive("socket0", "buf41", LrsLastArg);

        lrs_send("socket0", "buf42", LrsLastArg);

        lrs_receive("socket0", "buf43", LrsLastArg);

        lrs_send("socket0", "buf44", LrsLastArg);

        lrs_receive("socket0", "buf45", LrsLastArg);

        lrs_send("socket0", "buf46", LrsLastArg);

        lrs_receive("socket0", "buf47", LrsLastArg);

        lrs_send("socket0", "buf48", LrsLastArg);

        lrs_receive("socket0", "buf49", LrsLastArg);

        lrs_send("socket0", "buf50", LrsLastArg);

        lrs_receive("socket0", "buf51", LrsLastArg);

        lrs_send("socket0", "buf52", LrsLastArg);

        lrs_receive("socket0", "buf53", LrsLastArg);

        lrs_send("socket0", "buf54", LrsLastArg);

        lrs_receive("socket0", "buf55", LrsLastArg);

        lrs_send("socket0", "buf56", LrsLastArg);

        lrs_receive("socket0", "buf57", LrsLastArg);

        lrs_send("socket0", "buf58", LrsLastArg);

        lrs_receive("socket0", "buf59", LrsLastArg);

        lrs_send("socket0", "buf60", LrsLastArg);

        lrs_receive("socket0", "buf61", LrsLastArg);

        lrs_send("socket0", "buf62", LrsLastArg);

        lrs_receive("socket0", "buf63", LrsLastArg);

        lrs_send("socket0", "buf64", LrsLastArg);

        lrs_receive("socket0", "buf65", LrsLastArg);

        lrs_send("socket0", "buf66", LrsLastArg);

        lrs_receive("socket0", "buf67", LrsLastArg);

        lrs_send("socket0", "buf68", LrsLastArg);

        lrs_receive("socket0", "buf69", LrsLastArg);

        lr_think_time(5);

        lrs_close_socket("socket0");

        lr_end_transaction("denglu",LR_AUTO);

        return 0;
}
请问如何将其进行参数化操作？如：如何插入函数？插入Text/Imag 检查点等，急！！

TEST_140

谢谢版主！学习了。。多谢多谢。。。

kuangquanshui

这个完全不明白  学习了

linlinxu

socket 协议是在对应的data.ws文件中对数据进行参数化的，具体的做法跟其他的协议类似。socket协议不会涉及到Text/Imag的检查。都是坚持消息报文的正确性。