Transaction pop3 ended with Pass status (Duration: 1.4423).

weiwei555

用LR的Vuser运行录制脚本后在执行日志里有这样的句子Action.c(53): Notify: Transaction pop3 ended with Pass status (Duration: 1.4423).
那么红色部分表明该事务（pop3为定义的事务名）耗费的时间为1.4423秒吗？或者还是有其他的含义？

weiwei555

快回答呀，，速度，等着用呢

fish_yy

表示执行你这个事务用了多长时间！

weiwei555

明白了，谢谢。。。只是得出的执行时间的结果和实际值好像有些差别，可是事务设置有欠妥吧，继续尝试。sdlkfj8

rickyzhu

有差别，看你有没有think time?

weiwei555

我没有设置think time，但是时间差别也很大。这是我录制的脚本（设置了多个事务，最后算其累计时间）：

Action()
{
   
    lrs_create_socket("socket0", "TCP", "LocalHost=0", "RemoteHost=192.168.0.56:9080",  LrsLastArg);
    lrs_send("socket0", "buf0", LrsLastArg);
    lrs_receive("socket0", "buf1", LrsLastArg);
    lrs_send("socket0", "buf2", LrsLastArg);
    lrs_receive("socket0", "buf3", LrsLastArg);

    lrs_create_socket("socket1", "TCP", "RemoteHost=192.168.0.56:9080",  LrsLastArg);

    lr_start_transaction("pop");
    lrs_send("socket1", "buf4", LrsLastArg);
    lrs_receive("socket1", "buf5", LrsLastArg);
    lr_end_transaction("pop", LR_AUTO);

   lr_start_transaction("pop2");

  lrs_send("socket0", "buf6", LrsLastArg);

   lrs_receive("socket0", "buf7", LrsLastArg);

lr_end_transaction("pop2", LR_AUTO);

lr_start_transaction("pop3");
    lrs_send("socket0", "buf8", LrsLastArg);
    lrs_receive("socket0", "buf9", LrsLastArg);
lr_end_transaction("pop3", LR_AUTO);
   
lr_start_transaction("110");
lrs_send("socket0", "buf10", LrsLastArg);
lrs_receive("socket0", "buf11", LrsLastArg);
lr_end_transaction("110", LR_AUTO);

lr_start_transaction("5");
    lrs_send("socket0", "buf12", LrsLastArg);
    lrs_receive("socket0", "buf13", LrsLastArg);

lr_end_transaction("5", LR_AUTO);
lrs_close_socket("socket1");
    lrs_create_socket("socket2", "TCP", "RemoteHost=192.168.0.56:9080",  LrsLastArg);

lr_start_transaction("6");
    lrs_send("socket2", "buf14", LrsLastArg);
    lrs_receive("socket2", "buf15", LrsLastArg);
lr_end_transaction("6", LR_AUTO);

lr_start_transaction("7");
    lrs_send("socket2", "buf16", LrsLastArg);
    lrs_receive("socket2", "buf17", LrsLastArg);
lr_end_transaction("7", LR_AUTO);

lr_start_transaction("8");
    lrs_send("socket2", "buf18", LrsLastArg);
    lrs_receive("socket2", "buf19", LrsLastArg);
lr_end_transaction("8", LR_AUTO);

lr_start_transaction("9");
    lrs_send("socket2", "buf20", LrsLastArg);
    lrs_receive("socket2", "buf21", LrsLastArg);
lr_end_transaction("9", LR_AUTO);

    lrs_close_socket("socket2");
    return 0;
}