|
我一直按照教程学习WR,都还不错,但是昨天设置bitmap检查点的时候出错了,录制的时候完全按照教程走的,应该没有问题,回放到检查点的时候就报错:mismatch detected during bitmap verification.image name="imag2:1" object name:"(static)",设置的两个检查点都是这个错误,continue以后最终的测试结果当然也就是mismatch,不知道为什么,反复录了很多次都是这样的。我录制的脚本如下:
# Flight Reservation
set_window ("Flight Reservation", 2);
menu_select_item ("File;Open Order...");
# Open Order
set_window ("Open Order", 1);
button_set ("Order No.", ON);
edit_set ("Edit", "6");
button_press ("OK");
# Flight Reservation
set_window ("Flight Reservation", 2);
menu_select_item ("File;Fax Order...");
# Fax Order No. 6
set_window ("Fax Order No. 6", 2);
obj_type ("MSMaskWndClass","1234567890");
win_move ("Fax Order No. 6", 309, 232);
# Analog Recording
move_locator_track (1);
move_locator_track (2);
mtype ("<T1192><kLeft>-");
move_locator_track (3);
mtype ("<T161><kLeft>+");
move_locator_track (4);
mtype ("<T211><kLeft>-");
move_locator_track (5);
mtype ("<T110><kLeft>+");
move_locator_track (6);
mtype ("<T50><kLeft>-");
move_locator_track (7);
mtype ("<T220><kLeft>+");
move_locator_track (8);
mtype ("<T120><kLeft>-");
move_locator_track (9);
mtype ("<kLeft>+");
move_locator_track (10);
mtype ("<T140><kLeft>-");
move_locator_track (11);
mtype ("<T160><kLeft>+");
move_locator_track (12);
mtype ("<T121><kLeft>-");
move_locator_track (13);
mtype ("<T221><kLeft>+");
# Fax Order No. 6
win_activate ("Fax Order No. 6");
obj_check_bitmap("(static)", "Img1", 5);
set_window ("Fax Order No. 6", 3);
button_press ("Clear Signature");
obj_check_bitmap("(static)", "Img2", 3);
set_window ("Fax Order No. 6", 3);
button_press ("Cancel");
求各位帮帮忙,帮偶看下到底错在哪里?另外还想问下,学了WR很长时间了,反倒觉得越来越迷糊了,测试过程中设置检查点的意义是什么?我为什么要设呢?我知道问题比较菜鸟,但还是麻烦大家指教。
[ 本帖最后由 testzhu 于 2006-9-26 15:25 编辑 ] |
|