mantis邮箱配置求指导

sophie.jing · 发表于 2015-12-15 09:31:36

我用mantis+xampp搭建的mantis，邮箱配置这块按照网络上的教程进行配置，总是不成功，请教我下面的config_defaults_inc.php配置哪里不对？
/***************************
   * MantisBT Email Settings *
   ***************************/

/**
   * Administrator Email address
   * @global string $g_administrator_email
   */
/*$g_administrator_email = 'administrator@example.com';
   */
  $g_administrator_email = 'xxxxx@126.com';
/**
   * Webmaster email
   * @global string $g_webmaster_email
   */
/*$g_webmaster_email = 'webmaster@example.com';*/
   $g_webmaster_email = 'xxxxx@126.com';
/**
   * the sender email, part of 'From: ' header in emails
   * @global string $g_from_email
   */
/*$g_from_email = 'noreply@example.com';*/
   $g_from_email = 'xxxxx@126.com';
/**
   * the sender name, part of 'From: ' header in emails
   * @global string $g_from_name
   */
/*$g_from_name = 'Mantis Bug Tracker';*/
    $g_from_name = 'xxxxx';
/**
   * the return address for bounced mail
   * @global string $g_return_path_email
   */
/*$g_return_path_email = 'admin@example.com';*/
    $g_return_path_email = 'xxxxx@126.com';
/**
   * Allow email notification.
   * Set to ON to enable email notifications, OFF to disable them. Note that
   * disabling email notifications has no effect on emails generated as part
   * of the user signup process. When set to OFF, the password reset feature
   * is disabled. Additionally, notifications of administrators updating
   * accounts are not sent to users.
   * @global int $g_enable_email_notification
   */
$g_enable_email_notification = ON;

$g_default_notify_flags = array('reporter' => ON,
'handler' => ON,
'monitor' => ON,
'bugnotes' => ON,
'explicit'  => ON,
'threshold_min' => NOBODY,
'threshold_max' => NOBODY);

/**
   * We don't need to send these notifications on new bugs
   * (see above for info on this config option)
   * @todo (though I'm not sure they need to be turned off anymore
   *    - there just won't be anyone in those categories)
   *    I guess it serves as an example and a placeholder for this
   *    config option
   * @see $g_default_notify_flags
   * @global array $g_notify_flags
   */
$g_notify_flags['new'] = array('bugnotes' => OFF,
'monitor' => OFF);

$g_notify_flags['monitor'] = array( 'reporter' => OFF,
'handler' => OFF,
'monitor' => OFF,
'bugnotes' => OFF,
'explicit'  => ON,
'threshold_min' => NOBODY,
'threshold_max' => NOBODY);

/**
   * Whether user's should receive emails for their own actions
   * @global int $g_email_receive_own
   */
$g_email_receive_own = OFF;

/**
   * set to OFF to disable email check
   * @global int $g_validate_email
   */
$g_validate_email = ON;

/**
   * set to OFF to disable email check
   * @global int $g_check_mx_record
   */
$g_check_mx_record = OFF;

/**
   * if ON, allow the user to omit an email field
   * note if you allow users to create their own accounts, they
   * must specify an email at that point, no matter what the value
   * of this option is.  Otherwise they wouldn't get their passwords.
   * @global int $g_allow_blank_email
   */
$g_allow_blank_email = OFF;

/**
   * Only allow and send email to addresses in the given domain
   * For example:
   * $g_limit_email_domain = 'users.sourceforge.net';
   * @global string|int $g_limit_email_domain
   */
$g_limit_email_domain = OFF;

/**
   * This specifies the access level that is needed to get the mailto: links.
   * @global int $g_show_user_email_threshold
   */
$g_show_user_email_threshold = NOBODY;

/**
   * This specifies the access level that is needed to see realnames on user view page
   * @global int $g_show_user_realname_threshold
   */
$g_show_user_realname_threshold = NOBODY;

/**
   * If use_x_priority is set to ON, what should the value be?
   * Urgent = 1, Not Urgent = 5, Disable = 0
   * Note: some MTAs interpret X-Priority = 0 to mean 'Very Urgent'
   * @global int $g_mail_priority
   */
$g_mail_priority = 3;

/**
   * select the method to mail by:
   * PHPMAILER_METHOD_MAIL - mail()
   * PHPMAILER_METHOD_SENDMAIL - sendmail
   * PHPMAILER_METHOD_SMTP - SMTP
   * @global int $g_phpMailer_method
   */
$g_phpMailer_method = PHPMAILER_METHOD_MAIL;

/**
   * This option allows you to use a remote SMTP host.  Must use the phpMailer script
   * One or more hosts, separated by a semicolon, can be listed.
   * You can also specify a different port for each host by using this
   * format: [hostname:port] (e.g. "smtp1.example.com:25;smtp2.example.com").
   * Hosts will be tried in order.
   * @global string $g_smtp_host
   */
/*$g_smtp_host = 'localhost';*/
  $g_smtp_host = 'smtp.126.com:25';

/**
   * These options allow you to use SMTP Authentication when you use a remote
   * SMTP host with phpMailer.  If smtp_username is not '' then the username
   * and password will be used when logging in to the SMTP server.
   * @global string $g_smtp_username
   */
/*$g_smtp_username = '';*/
      $g_smtp_username = 'xxxxx';

/**
   * SMTP Server Authentication password
   * @global string $g_smtp_password
   */
/*$g_smtp_password = '';*/
      $g_smtp_password = 'sss';

/**
   * This control the connection mode to SMTP server. Can be 'ssl' or 'tls'
   * @global string $g_smtp_connection_mode
   */
$g_smtp_connection_mode = '';

/**
   * The smtp port to use.  The typical SMTP ports are 25 and 587.  The port to use
   * will depend on the SMTP server configuration and hence others may be used.
   * @global int $g_smtp_port
   */
$g_smtp_port = 25;

/**
   * It is recommended to use a cronjob or a scheduler task to send emails.
   * The cronjob should typically run every 5 minutes.  If no cronjob is used,
   * then user will have to wait for emails to be sent after performing an action
   * which triggers notifications.  This slows user performance.
   * @global int $g_email_send_using_cronjob
   */
$g_email_send_using_cronjob = OFF;

/**
   * Specify whether e-mails should be sent with the category set or not.  This is tested
   * with Microsoft Outlook.  More testing for this feature + other formats will be added
   * in the future.
   * OFF, EMAIL_CATEGORY_PROJECT_CATEGORY (format: [Project] Category)
   * @global int $g_email_set_category
   */
$g_email_set_category = OFF;

/**
   * email separator and padding
   * @global string $g_email_separator1
   */
$g_email_separator1 = str_pad('', 70, '=');
/**
   * email separator and padding
   * @global string $g_email_separator2
   */
$g_email_separator2 = str_pad('', 70, '-');
/**
   * email separator and padding
   * @global int $g_email_padding_length
   */
$g_email_padding_length = 28;

问题1 ：这段代码加粗的地方哪里设置不对吗？反正还是不能发送邮件。
问题2：phpmailer需要自己下载放在特定位置吗？需要另外配置phpmailer吗？
问题3：配置中输入的邮箱全部是同一个邮箱账户吗？是否分收件邮箱和发件邮箱？
问题4：配置为126的smtp，也可以收发foxmail邮箱的邮件吧？

luming · 发表于 2015-12-15 10:25:19

最好自己搭建一个邮件服务器，看能否收到。
外面的邮件服务器会有黑名单之类的，或者去垃圾邮件看看。

sophie.jing · 发表于 2015-12-15 14:48:48

mantis中需要自己下载phpmailer并且去配置吗？

luming · 发表于 2015-12-15 16:41:03

sophie.jing 发表于 2015-12-15 14:48
mantis中需要自己下载phpmailer并且去配置吗？

应该不需要，看看你的buxampp配置文件，是否打开了phpmailer。
最好的办法是自己搭建一个邮件服务器，能给自己发通邮件，再发外面的。

平平淡淡 · 发表于 2015-12-15 19:10:08

前几天也是自己搭建的mantis，邮箱配置方面自己整理了一个文档，可以参考一下

在config_inc.php文件中，将以下信息修改为：
# --- Email Configuration ---
$g_use_phpMailer = ON;
$g_phpMailer_method=2;
#orPHPMAILER_METHOD_SMTP, PHPMAILER_METHOD_SENDMAIL
此处是设置邮件发送方式，该方式为smtp
$g_smtp_host= 'smtp.163.com';
# used with PHPMAILER_METHOD_SMTP此处是设置邮件发送服务器地址
$g_smtp_port = 25;
邮件服务器地址，后边需加入的端口号，正确格式xxxx@xxx.com:25
$g_smtp_username= '';
#used with PHPMAILER_METHOD_SMTP此处需要写邮箱登录用户名
$g_smtp_password ='';
# used with PHPMAILER_METHOD_SMTP此处需要写邮箱登录密码
$g_administrator_email = '';此处需要填写发送邮件的邮箱地址
$g_webmaster_email= ''; 此处需要填写发送邮件的邮箱地址
$g_from_email = ''; 此处需要填写发送邮件的邮箱地址
# the"From:" field in emails
$g_return_path_email = ''; 此处需要填写退信的邮箱地址
# the return address for bounced mail
经常会遇到，无法发送邮件，而又不知道如何解决的问题，可以通过以下方法进行调试：
1、增加调试语句，在文件/core/email_api.php的1032行，增加调试语句：var_dump(LOG_EMAIL);var_dump($t_log_msg . $mail->ErrorInfo);
2、进入邮件测试界面，在浏览器中输入测试地址，例如：
http://mantis/admin/test_email.php（该地址需要与当前设置的mantis安装路径），点击测试，就可以对发送失败原因进行检测。

sophie.jing · 发表于 2015-12-23 15:54:14

平平淡淡发表于 2015-12-15 19:10
前几天也是自己搭建的mantis，邮箱配置方面自己整理了一个文档，可以参考一下

在config_inc.php文件中 ...

按照这个配置，去mantis邮件测试页面成功了，但是126邮箱没有收到测试邮件。而且加了调试代码，也没有看到什么信息啊？

sophie.jing · 发表于 2015-12-23 16:26:33

Testing Mail - mail() send successful.
现在测试邮件能成功，但是126邮箱中没有收到测试邮件。怎么办？

duxiaohan0326 · 发表于 2015-12-25 16:47:54

1、在D:\xampp\php\php.ini中修改（这里是以163的邮箱为例子）：
For Win32 only.SMTP = smtp.163.com; //设置邮箱的发送地址；
For Win32 only.sendmail_from = 你的id@163.com //设置你的邮件地址全称；
2、 mantis下的config.inc.php中内容设置为：
$g_smtp_host='smtp.163.com'; //设置邮箱的发送地址
$g_smtp_username='你的id';          //设置邮箱的用户名
$g_smtp_password='你的163邮箱密码'; //设置邮箱的密码
$g_phpMailer_method =2; //此处的数值可为0，1，2：//0为调用了一个mantis内置的mail（）函数来发送邮件；//1为sendmail方式；//2为使用smtp方式，登录到邮件服务器内来发送邮件。
3. mantis文件夹下的config_default.inc.php中修改如下:
$g_administrator_email = 'XXX@163.com'; //设置你邮件地址的全称
$g_webmaster_email  ='XXX@163.com';
$g_from_email = 'XXX@163.com';
$ g_return_path_email = 'XXX@163.com';
$g_phpMailer_method  = 2;
$g_smtp_host = 'smtp.163.com';

duxiaohan0326 · 发表于 2015-12-25 16:48:48

duxiaohan0326 发表于 2015-12-25 16:47
1、在D:\xampp\php\php.ini中修改（这里是以163的邮箱为例子）：
For Win32 only.SMTP = smtp.163.com; ...

这是我以前写的xammp模式下搭建mantis的邮件配置，你试下。别人给的

sophie.jing · 发表于 2016-1-19 16:17:18

duxiaohan0326 发表于 2015-12-25 16:47
1、在D:\xampp\php\php.ini中修改（这里是以163的邮箱为例子）：
For Win32 only.SMTP = smtp.163.com; ...

完全按照你这个步骤来的，还是收不到邮件。
注册或者测试页，都没有报错。
会是公司网络限制的问题吗？（限制外网，但126邮箱还是能用的）

zhoubianyouhui · 发表于 2016-1-29 15:44:01

最好自己搭建一个邮件服务器

sophie.jing · 发表于 2016-3-15 10:03:56

没有给积点，能来回答的人都是真善良的人。最后也没成功，买了个。

duxiaohan0326 · 发表于 2016-5-18 10:45:15

sophie.jing 发表于 2016-3-15 10:03
没有给积点，能来回答的人都是真善良的人。最后也没成功，买了个。

邮箱里的SMTP设置看下有没有开启

sophie.jing · 发表于 2016-6-14 17:07:16

duxiaohan0326 发表于 2016-5-18 10:45
邮箱里的SMTP设置看下有没有开启

开了，开始的时候没开，后来我发现了，就开了，但是还是不行。邮件服务器这块不太熟。最后买一个用了。

		自动登录	找回密码
密码			(注-册)加入51Testing

mantis邮箱配置求指导

评分

站长推荐 /1