没有找到你说的文件,下面是Recording log
---------------------------------------------------------------------
Load Network Traffic Analyzers:
Analyzer Module: WPLUS (value=)
Analyzer Module: WebBase (value=GetHttpProtocolAnalyzer:api_http_filter.dll)
+ Network Analyzer: api_http_filter.dll @ GetHttpProtocolAnalyzer Loaded!
+ Interception Auditors: WinInetWplusInterceptionAudit:api_http_filter.dll
Analyzer Module: QTWeb (value=)
Analyzer Module: local_server (value=)
------------------------------------------------------------------------------------------
Address lookup for TMS-jinjianguo-T1 = 192.168.20.107
Address lookup for TMS-jinjianguo-T1 = 192.168.20.107
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #1. Unable to connect to remote server: rc = -1 , le = 0)
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #2. Unable to connect to remote server: rc = -1 , le = 0)
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #3. Unable to connect to remote server: rc = -1 , le = 0)
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=)NOT PROXIED! (REASON: Unable to connect to remote server: rc = -1 , le = 0)
Address lookup for TMS-jinjianguo-T1 = 192.168.20.107
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #1. Unable to connect to remote server: rc = -1 , le = 0)
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #2. Unable to connect to remote server: rc = -1 , le = 0)
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #3. Unable to connect to remote server: rc = -1 , le = 0)
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=)NOT PROXIED! (REASON: Unable to connect to remote server: rc = -1 , le = 0)
Address lookup for TMS-jinjianguo-T1 = 192.168.20.107
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #1. Unable to connect to remote server: rc = -1 , le = 0)
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #2. Unable to connect to remote server: rc = -1 , le = 0)
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #3. Unable to connect to remote server: rc = -1 , le = 0)
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=)NOT PROXIED! (REASON: Unable to connect to remote server: rc = -1 , le = 0)
记录上写的很明白了，只看这条：
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=) Failed attempt #1. Unable to connect to remote server: rc = -1 , le = 0)
下面的Log是Vugen.exe在不停尝试去连接，但始终没能成功
[ 本帖最后由 shanxi 于 2007-5-12 12:54 编辑 ]
谢谢啊。.问题出在这里。.怎么去解决啊.!!麻烦你指点一下 .~!!
用netstat命令看本地Server的1080端口服务启动了没？
再确保本地的1080端口是打开的，比如到系统防火墙里面把1080加入允许端口
我机器上的是关闭的。.
我run->netsart
Active Connections
没有看到1080 .
我机器上的防火墙是关闭的。.
我run->netsart
Active Connections
没有看到1080 .
看这个链接上的KB:The Web Recorder is not recording any events
一个条件一个条件地去排除
先尝试一下 录制前卸载机器上的杀毒软件
谢谢。啊。.!
我机器是是装了杀毒软件，2个。诺顿,和AVG.
谢谢你的孜孜不倦的指点啊。我卸了 杀毒的软件在试 试!!
我卸了 杀毒的软件,还是有这个错误!
Request Connection: Remote Server @ 127.0.0.1:1080 (Service=)NOT PROXIED! (REASON: Unable to connect to remote server: rc = -1 , le = 0)
我也有同样的问题,录制的时候有事件,但是脚本是空的,不知道怎么回事,因为公司不能上网,所以我的机子也没装防火墙和杀毒软件
按照这个链接上的KB:The Web Recorder is not recording any events
已经排除了杀毒软件，防火墙设置这条了
用LR去做需要保证机器是干净的，所谓干净的机器是OS上没有安装除LR之外的其他软件。一般这样就不会出现录制问题
[ 本帖最后由 shanxi 于 2007-5-12 12:55 编辑 ]
我还是重新装了个干净的系统,ok了。哈哈。谢谢你门,shanxi ,wwwlisheng ,rickyzhu and zee.
不是吧，用loadrunner那么不容易啊，什么软件都不能装，我岂不是用不成loadrunner了？？
ddsdlkfj2
dsf
录制内部网试下
呵呵，当然，不仅是loadrunner，做测试一般来说都应该用一个相对干净的系统吧，避免引起不必要的冲突
51高手还真多
我的8.1第一次装，没有关闭防火墙， 导致analysis module不能用，后来冲撞系统，关了防火墙、杀毒软件、断网装的，现在可以用了，呵呵，其实在这个过程中重装了一次系统，恢复了3、4次系统，sdlkfj1
怕怕哦。。
建议！装loadrunner之前一定要备份系统，嘎嘎。。。
