这是一个winsocket层的标准错误：
Software caused connection abort
This error message means somewhere the connection was lost and X-Win32 gave up on the connection since it couldn’t re-establish. This isn’t a problem with X-Win32, but rather somewhere your connection is being lost. Possible causes are:
- Windows power savings settings
- You are going through a router or switch that kills sessions if they are idle too long.
- Your UNIX host is disconnecting for some reason.
- There’s too much traffic and not enough bandwidth for X-Win32 to maintain its connection.
I would suggest:
- Turning off all screen savers and power saving options in Windows, at least until you isolate where the problem is.
- Trying connections to other hosts to see if it’s a specific switch, hub, or router that’s severing the connections.
- Try sending something over the connection all the time so it doesn’t quit. For example, run, “xclock &” once you connect with xterm and see if that helps.
- Make sure all firewalls are disabled, make sure your UNIX host isn’t under too much stress and the network connections have enough bandwidth to keep connections going.
