=========================================================
Error 10-12-2010 2:34:29.704 下午 Intialization - A device was not found. Please make sure that you have one plugged in.
File: d:\5429t\testsrc\driverstest\usb\compliancetools\usbcheck\usbcommandverifier\source\commonhelperfunctions.cpp Line: 262
Error Type: BOOL
Error Code: 0x0
Error Text: Error 0x00000000
Error 10-12-2010 2:34:29.704 下午 If you are testing a full/low speed device, please connect the device to a USB 2.0 high speed hub and connect the USB 2.0 high speed hub to the USB 2.0 host controller on this system.
File: d:\5429t\testsrc\driverstest\usb\compliancetools\usbcheck\usbcommandverifier\source\commonhelperfunctions.cpp Line: 272
Error Type: BOOL
Error Code: 0x0
Error Text: Error 0x00000000
=========================================================
Error 10-12-2010 2:41:54.626 下午 Device with ID XXXX/XXXX found in tree but tree must be at least 1 external hubs deep but not more than 2 external hubs deep.
File: d:\5429t\testsrc\driverstest\usb\usbhct\exe\selstest.cpp Line: 290
Error Type: BOOL
Error Code: 0x0
Error Text: Error 0x00000000
Result: Fail
Repro: C:\WTT\JobsWorkingDir\Tasks\WTTJobRun2A2C9CA7-2EC7-49DB-B136-E164001A2FFD\usbhct.exe -s -d XXXX/XXXX -l usbhct_s.log
您好!我加入了HUB测试后出现了其他错误,您能帮我看下吗?错误如下:
USB Enable Disable Test
Execute TestID Check
USB Address Description Test
USB Descriptor test作者: ccy.ybfq 时间: 2010-10-13 11:27 回复 2#愚人