2、配置 httpd.conf，增加蓝色一行，随后启动 httpd，设置为开机启动
[root@bogon ~]# vi /etc/httpd/conf/httpd.conf
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#
#ServerName www.example.com:80
ServerName localhost:80
[root@bogon ~]# service httpd start
正在启动 httpd：[确定]
[root@bogon ~]# chkconfig httpd on
[root@bogon ~]#
3、编辑 hosts 文件，为主机名配置一个本地 IP 地址，随后启动 mysqld 服务
[root@bogon ~]# vi /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
127.0.0.1 bogon
[root@bogon ~]# service mysqld start
[root@bogon ~]# chkconfig mysqld on
[root@bogon ~]#
4、配置 mysql
[root@bogon ~]# mysqladmin -u root -p password "123456"
Enter password: (这里要求输入之前的密码，由于默认密码为空，直接回车即可)
[root@bogon ~]# mysql -uroot -p123456
mysql> create database bugs;
Query OK, 1 row affected (0.00 sec)
若要设置 root 用户可以远程访问，执行
mysql> GRANT ALL PRIVILEGES ON *.* TO root@"%" IDENTIFIED BY "123456";
Query OK, 0 rows affected (0.00 sec)
mysql> flush privileges;
Query OK, 0 rows affected (0.01 sec)
mysql> quit
Bye
[root@bogon ~]#
配置防火墙
要远程访问服务，需要开启服务端口，增加蓝色两行（mysql 端口:3306,tomcat 端口:8080）
[root@bogon ~]# vi /etc/sysconfig/iptables,
# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -j REJECT --reject-with icmp-host-prohibited
COMMIT
刷新防火墙配置：
[root@bogon ~]# service iptables restart
OK，一切配置完毕，你可以远程访问你的 MySQL 了~
5、下载并解压 Bugzilla
[root@bogon ~]# wget https://ftp.mozilla.org/pub/mozilla.org/webtools/bugzilla-4.4.12.tar.gz
[root@bogon ~]# tar xf bugzilla-4.4.12.tar.gz -C /var/www/html/
[root@bogon ~]# cd /var/www/html/
[root@bogon html]# mv bugzilla-4.4.12 bugzilla
[root@bogon html]#
检测 Bugzilla 缺少的组件
[root@bogon html]# cd bugzilla/
[root@bogon bugzilla]# ./checksetup.pl --check-modules
随后会打印一些信息，会看到一些标为 not found 的缺失组件
6、在线自动安装 Bugzilla 缺少的组件（安装时间较长）
[root@bogon bugzilla]# perl install-module.pl --all
Checking for CPAN (v1.81) ok: found v1.9402
Checking for YAML (any) ok: found v0.70
Checking for ExtUtils-MakeMaker (v6.31) ok: found v6.55_02
Fetching with LWP: http://www.cpan.org/authors/01mailrc.txt.gz
......
Installing /var/www/html/bugzilla/lib/man/man3/DBD::SQLite::Cookbook.3pm
Installing /var/www/html/bugzilla/lib/man/man3/DBD::SQLite::Fulltext_search.3pm
Installing /var/www/html/bugzilla/lib/man/man3/DBD::SQLite::VirtualTable.3pm
Appending installation info to
/var/www/html/bugzilla/lib/x86_64-linux-thread-multi/perllocal.pod
ISHIGAKI/DBD-SQLite-1.48.tar.gz
/usr/bin/make install -- OK
[root@bogon bugzilla]#
7、执行 checksetup.pl 后，目录下会生成一个 localconfig 文件
[root@bogon bugzilla]# ./checksetup.pl
* This is Bugzilla 4.5.2 on perl 5.10.1
* Running on Linux 2.6.32-431.el6.x86_64 #1 SMP Fri Nov 22 03:15:09 UTC 2013
Checking perl modules...
Checking for CGI.pm (v3.51) ok: found v3.64
......
Please edit the file ./localconfig and then re-run checksetup.pl
to complete your installation.
[root@bogon bugzilla]#
8、编辑 localconfig 文件，将如下参数设置正确
[root@bogon bugzilla]# vi localconfig
# The DNS name or IP address of the host that the database server runs on.
$db_host = 'localhost';
# The name of the database. For Oracle, this is the database's SID. For
# SQLite, this is a name (or path) for the DB file.
$db_name = 'bugs';
# Who we connect to the database as.
$db_user = 'root';
# Enter your database password here. It's normally advisable to specify
# a password for your bugzilla database user.
# If you use apostrophe (') or a backslash (\) in your password, you'll
# need to escape it by preceding it with a '\' character. (\') or (\)
# (It is far simpler to just not use those characters.)
$db_pass = '123456';
# Sometimes the database server is running on a non-standard port. If that's
# the case for your database server, set this to the port number that your
# database server is running on. Setting this to 0 means "use the default
# port for my database server."
$db_port = 3306;
9、设置管理员信息和密码。下面的管理员邮箱和密码必须正确，否则会发不出邮件。
[root@bogon bugzilla]# ./checksetup.pl
* This is Bugzilla 4.5.2 on perl 5.10.1
......
Enter the e-mail address of the administrator: masterbox@163.com # bugzilla 管理员账号
Enter the real name of the administrator: xiegx
Enter a password for the administrator account: 123456
Please retype the password to verify: 123456 bugzilla@jnsec.net is now set up as an administrator.
Creating initial dummy product 'TestProduct'...
Now that you have installed Bugzilla, you should visit the 'Parameters'
page (linked in the footer of the Administrator account) to ensure it
is set up as you wish - this includes setting the 'urlbase' option to
the correct URL.
checksetup.pl complete.
[root@bogon bugzilla]#
10、配置 httpd 参数，进入编辑器后按 Shift + g 键将光标移动到最下行，增加蓝色部分的配置
[root@bogon bugzilla]# vi /etc/httpd/conf/httpd.conf
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
<VirtualHost *:80>
DocumentRoot /var/www/html/
</VirtualHost>
<Directory /var/www/html >
AddHandler cgi-script .cgi
Options +Indexes +ExecCGI
DirectoryIndex index.cgi
AllowOverride Limit FileInfo Indexes
</Directory>
