51Testing软件测试论坛

标题: 请问为什么loadrunner在URL链接中参数化会报错？ [打印本页]

作者: CrazyPolaris 时间: 2015-12-18 18:36
标题: 请问为什么loadrunner在URL链接中参数化会报错？
本帖最后由 CrazyPolaris 于 2015-12-18 19:24 编辑

脚本如下：
Action()
{
      web_set_max_html_param_len("1024");
      web_reg_save_param("JSESSIONID",
            "LB=JSESSIONID=",
            "RB=;",
            "ORD=1",
            LAST);

      web_add_cookie("JSESSIONID={JSESSIONID}; DOMAIN=as2.anbwf.com");

      web_reg_save_param("code",
            "LB=code=",
            "RB=&state=",
            "ORD=1",
            LAST);

      web_url("list",

            "URL=http://as2.anbwf.com/bsfwx/cookedgoods/list?code={code}&state=STATE",
            "Resource=0",
            "RecContentType=text/html",
            "Referer=",
            "Snapshot=t5.inf",
            "Mode=HTTP",
            LAST);

      return 0;
}
页面是在微信公众号里面的，code是微信返回的动态参数，本想取关联，但是在这关联出错，求大神解析。

报错信息如下：
Action.c(4): Registering web_reg_save_param was successful       [MsgId: MMSG-26390]
Action.c(10): Warning: The string 'JSESSIONID' with parameter delimiters is not a parameter.
Action.c(10): web_add_cookie was successful       [MsgId: MMSG-26392]
Action.c(12): Registering web_reg_save_param was successful       [MsgId: MMSG-26390]
Action.c(18): Warning: The string 'code' with parameter delimiters is not a parameter.
。。。。。。。。。

Action.c(18): Error -26377: No match found for the requested parameter "code". Check whether the requested boundaries exist in the response data. Also, if the data you want to save exceeds 256 bytes, use web_set_max_html_param_len to increase the parameter size       [MsgId: MERR-26377]
Action.c(18): Notify: Saving Parameter "code = ".
Action.c(18): web_url("list") highest severity level was "ERROR", 23502 body bytes, 245 header bytes, 29 chunking overhead bytes       [MsgId: MMSG-26387]
Ending action Action.

作者: fhhh_eyou 时间: 2015-12-18 19:10
web_set_max_html_param_len("1024");
if the data you want to save exceeds 256 bytes, use web_set_max_html_param_len to increase the parameter size
定义长度错误

作者: CrazyPolaris 时间: 2015-12-19 14:36

fhhh_eyou 发表于 2015-12-18 19:10
web_set_max_html_param_len("1024");
if the data you want to save exceeds 256 bytes, use web_set_ma ...

不是这个原因，改成web_set_max_html_param_len("5000");还是报错。

作者: fhhh_eyou 时间: 2015-12-19 15:54
1. web_reg_save_param("JSESSIONID",
"LB=JSESSIONID=",
Warning: The string 'JSESSIONID' with parameter delimiters is not a parameter.
2. highest severity level was "ERROR", 23502 body bytes, 245 header bytes, 29 chunking overhead bytes [MsgId: MMSG-26387]
URL=http://as2.anbwf.com/bsfwx/cookedgoods/list?code={code}&state=STATE",

作者: CrazyPolaris 时间: 2015-12-23 14:47

fhhh_eyou 发表于 2015-12-19 15:54
1. web_reg_save_param("JSESSIONID",
"LB=JSESSIONID=",
Warning: The string 'JSESSI ...

谢谢，不是这个原因

作者: 7777777yeol 时间: 2016-7-13 18:01
同问，不知楼主怎么解决的？求分享

欢迎光临 51Testing软件测试论坛 (http://bbs.51testing.com/)